 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BTA40, BTA41, BTB41 40 A standard TRIACs Features A2 High current TRIAC Low thermal resistance with clip bonding High commutation capability BTA series UL1557 certified (File ref: 81734) Packages are RoHS (2002/95/EC) compliant A1 G A2 G A1 Applications On/off function in static relays, heating regulation, induction motor starting circuits Phase control operations in light dimmers, motor speed controllers, and similar RD91 insulated (BTA40) A2 Description A1 A2 A1 G A2 G Available in high power packages, the BTA/BTB40-41 series is suitable for general purpose AC switching. The BTA series provides an insulated tab (rated at 2500 V rms). TOP3 insulated (BTA41) TOP3 (BTB41) Table 1. Symbol IT(RMS) VDRM/VRRM IGT Device summary Parameter On-state rms current Repetitive peak off-state voltage Triggering gate current BTA40(1) 40 600 and 800 50 BTA41(1) 41 600 and 800 50 BTB41 41 600 and 800 50 Unit A V mA 1. Insulated package August 2009 Doc ID 7469 Rev 8 1/9 www.st.com 9 Characteristics BTA40, BTA41, BTB41 1 Table 2. Symbol IT(RMS) Characteristics Absolute maximum ratings Parameter On-state rms current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Non repetitive surge peak off-state voltage Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range TOP3 RD91 / TOP ins. F = 50 Hz F = 60 Hz tp = 10 ms F = 120 Hz tp = 10 ms tp = 20 s Tj = 125 C Tj = 25 C Tj = 125 C Tj = 125 C Tc = 95 C Tc = 80 C t = 20 ms t = 16.7 ms 400 A 420 1000 50 VDSM/VRSM + 100 8 1 - 40 to + 150 - 40 to + 125 As A/s V A W C Value 40 Unit A ITSM It dI/dt VDSM/VRSM IGM PG(AV) Tstg Tj Table 3. Symbol IGT (1) VGT VGD IH (2) IL dV/dt(2) (dV/dt)c (2) Electrical characteristics (Tj = 25 C, unless otherwise specified) Parameter I - II - III IV ALL VD = VDRM RL = 3.3 k Tj = 125 C IT = 500 mA I - III - IV IG = 1.2 IGT VD = 67% VDRM gate open (dI/dt)c = 20 A/ms MAX. II Tj = 125 C Tj = 125 C MIN. MIN. 160 500 10 V/s V/s ALL MAX. MAX. MIN. MAX. Value 50 100 1.3 0.2 80 70 mA Unit mA V V mA VD = 12 V RL = 33 1. Minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1 2/9 Doc ID 7469 Rev 8 BTA40, BTA41, BTB41 Table 4. Symbol VT (1) Vt0 Rd (2) (2) Characteristics Static characteristics Test conditions ITM = 60 A tp = 380 s Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C MAX. MAX. MAX. MAX. 5 mA Value 1.55 0.85 10 5 Unit V V m A Threshold voltage Dynamic resistance VDRM = VRRM IDRM IRRM 1. Minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1 Table 5. Symbol Rth(j-c) Rth(j-a) Thermal resistance Test conditions RD91 (insulated) / TOP3 insulated Junction to case (AC) TOP3 Junction to ambient TOP3 / TOP3 insulated 0.6 50 C/W Value 0.9 C/W Unit Figure 1. Maximum power dissipation versus Figure 2. on-state rms current (full cycle) 45 40 On-state rms current versus case temperature (full cycle) P(W) 50 IT(RMS)(A) =180 BTB41 40 35 30 BTA40 BTA41 30 25 20 20 15 180 10 IT(RMS)(A) 0 0 5 10 15 20 25 30 10 5 0 TC(C) 0 25 50 75 100 125 35 40 Figure 3. Relative variation of thermal impedance versus pulse duration Figure 4. On-state characteristics (maximum values) K=[Zth/Rth] 1.E+00 Zth(j-c) ITM(A) 400 Tj max. Vto = 0.85V Rd = 10 m 100 Tj = Tj max. 1.E-01 Zth(j-a) BTA / BTB41 Tj = 25C. 10 1.E-02 1.E-03 1.E-03 1.E-02 1.E-01 tp(s) 1.E+00 1.E+01 1.E+02 1.E+03 VTM(V) 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Doc ID 7469 Rev 8 3/9 Characteristics BTA40, BTA41, BTB41 Figure 5. Surge peak on-state current versus Figure 6. number of cycles Non-repetitive surge peak on-state current for a sinusoidal pulse and corresponding value of I2t 2 2 ITSM(A) 450 400 350 300 250 200 150 100 50 0 1 10 100 1000 Repetitive TC=70C Non repetitive Tj initial=25C t=20ms ITSM(A), I t (A s) 10000 dI/dt limitation: 50A/s ITSM Tj initial=25 C Pulse width tp < 10 ms I2t One cycle 1000 Number of cycles 100 0.01 0.10 tp(ms) 1.00 10.00 Figure 7. Relative variation of gate trigger, Figure 8. holding and latching current versus junction temperature 2.0 1.8 Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values) IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25C] 2.5 (dI/dt)c [(dV/dt)c] / specified (dI/dt)c 2.0 IGT 1.6 1.4 1.5 IH & IL Typical values 1.2 1.0 0.8 1.0 0.5 Tj(C) 0.0 -40 -20 0 20 40 60 80 100 120 140 0.6 0.4 0.1 1.0 (dV/dt)c (V/s) 10.0 100.0 Figure 9. Relative variation of critical rate of decrease of main current versus (dV/dt)c (dI/dt)c [Tj] / (dI/dt)c [Tj specified] 6 5 4 3 2 1 Tj(C) 0 0 25 50 75 100 125 4/9 Doc ID 7469 Rev 8 BTA40, BTA41, BTB41 Ordering information scheme 2 Ordering information scheme Figure 10. Ordering information scheme BT A 40 - 600 B RG TRIAC series Insulation A = insulated B = non-insulated Current 40 = 40 A in RD91 Voltage 600 = 600 V 800 = 800 V Sensitivity and type B = 50 mA standard Packing mode RG = Tube Blank = Bulk Doc ID 7469 Rev 8 5/9 Package information BTA40, BTA41, BTB41 3 Package information Epoxy meets UL94, V0 Lead-free packages In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 6. TOP3 insulated and non-insulated dimensions Dimensions Ref. H R B A Millimeters Min. Max. 4.6 1.55 15.60 0.7 2.9 16.5 21.1 15.5 5.65 3.65 4.17 1.40 Inches Min. 0.173 0.057 0.565 0.020 0.106 0.622 0.815 0.594 0.213 0.134 0.161 0.047 Max. 0.181 0.061 0.614 0.028 0.114 0.650 0.831 0.610 0.222 0.144 0.164 0.055 A B 4.4 1.45 14.35 0.5 2.7 15.8 20.4 15.1 5.4 3.4 4.08 1.20 OL K G C D F E F G P C H J J J D E K OL P R 4.60 typ. 0.181 typ. 6/9 Doc ID 7469 Rev 8 BTA40, BTA41, BTB41 Table 7. RD91 dimensions Package information Dimensions Ref. Millimeters Min. A2 L2 L1 Inches Min. 1.177 0.531 0.077 0.027 0.157 0.441 0.122 0.067 33 28 Max. 1.575 1.193 0.867 1.063 0.650 0.945 0.551 0.138 0.118 0.035 0.177 0.535 0.138 0.075 43 38 Max. 40.00 30.30 22.00 27.00 16.50 24.00 14.00 3.50 3.00 0.90 4.50 13.60 3.50 1.90 43 38 A A1 A2 29.90 13.50 1.95 0.70 4.00 11.20 3.10 1.70 33 28 B2 C B1 B B1 C2 A1 C1 B2 C C1 N2 N1 C2 B F E3 F E3 I A I L1 L2 N1 N2 Doc ID 7469 Rev 8 7/9 Ordering information BTA40, BTA41, BTB41 4 Ordering information Table 8. Ordering information Marking BTA40xxxB BTA41xxxB BTB41xxxB Package RD91 TOP3 Ins. TOP3 Weight 20 g 4.5 g 4.5 g Base qty Delivery mode 25 30 30 Bulk Tube Tube Order code(1) BTA40-xxxB BTA41-xxxBRG BTB41-xxxBRG 1. xxx = voltage 5 Revision history Table 9. Date Sep-2003 25-Mar-2005 14-Oct-2005 Document revision history Revision 5 6 7 Last update. TOP3 delivery mode changed from bulk to tube. Tc values for IT changed in Table 3. ECOPACK statement added. Updated Table 2 to correctly place packages. Updated Figure 2. Table 5 changed to correctly place TOP3. Updated ECOPACK statement. Changes 10-Aug-2009 8 8/9 Doc ID 7469 Rev 8 BTA40, BTA41, BTB41 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 7469 Rev 8 9/9 |
Price & Availability of BTA41
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |